UV DTF Stickers
Size
Quantity
Total
Free Shipping For Orders Over $49
Order one, or a few hundred
Start with a single transfer to test your design, or order in bulk when it’s ready for your product line. Choose a standard size from 2" to 5", or enter any custom size up to 10" x 10" for oversized decals, wide labels, or odd shapes. Prices drop as the quantity goes up, so a 25-pack costs far less per sticker than a single.
✓
Title: Standard or custom sizes
Pick 2", 3", 4", or 5", or type in your own size up to 10" x 10" and see the price update before you order.
✓
True Opaque Colors
A dense white underbase ensures your colors pop and remain 100% opaque, even on dark or clear surfaces.
No background, just your artwork
UV DTF transfers are different from regular stickers. There’s no background, no border, and no visible film, just your artwork sitting on the surface like it was printed there. Peel the design from its carrier, press it onto a smooth, hard surface, and rub it down. It’s a clean way to put a logo on a glass jar, a label on a metal tin, or a design on an acrylic sign.
1
Title: No background, just your artwork
Only the printed design transfers, so edges stay sharp and there’s no sticker border or backing showing on the surface.
2
Peel, press, and rub
Each transfer comes ready to apply with a carrier film. No heat press or special tools needed, just a clean, dry, smooth surface.
How to apply your UV DTF stickers
1
Clean the Surface
Wipe the application area with isopropyl alcohol or water. Let it air-dry for 30–60 seconds — any leftover dust, oil, or moisture will weaken the adhesive bond.
30–60 sec dry time2
Peel the Carrier Film
Starting at one corner, slowly peel the clear top film back at a 45° angle. Peeling too fast risks lifting fine detail edges off the design.
Go slow on fine detail3
Position & Apply
The adhesive grabs instantly on touch, so line up the sticker exactly where you want it before contact.
No repositioning after contact4
Squeegee or Rub Firmly
Press from the center outward in overlapping strokes using a card or squeegee. This pushes out trapped air and fully activates the pressure-sensitive adhesive.
Center-out, overlapping passes5
Peel Away the Backing
Once fully pressed, peel the backing paper away slowly at a low angle. If any corner lifts with it, stop and rub it back down immediately before continuing.
Rub down any lifting edgeCured and ready to go. Once applied, our UV DTF stickers are scratch-resistant and waterproof within 24 hours. Avoid submerging or heavy handling in the first day while the adhesive fully sets.
